NetBurner Community Forum

I have a similar question regarding this pin. Apparently at some time I decided it was available to use as a GPIO resource. Am I correct in thinking that this is not actually true and there is no way in software to change the functionality of this pin? ...and here I was just getting used to having s...

Thanks Tom. I don't plan to do any configuration via SNMP but like most companies our customers are looking for security so I'll be going the v3 route. The mib should be pretty simple in my case. I've got an example of a v1 mib to go by. Hopefully that will be enough. We prefer configuration to be v...

I see that Netburner recommends DMH software for an SNMP package. I went to the DMH page but they don't show the MODM7AE70 as being one of the Netburner SOMs that they support. Could be that they have just not updated their page. I'm planning to implement a very simple SNMP query/notification packag...

Mike, Thank you very much for your ClearISR() routine! It works perfectly. The only change I made was to the forward declaration in pin_irq.h. The actual routine returns void and the forward declaration called for it to return uint32_t. Instead of changing the Netburner source I simply incorporated ...

I'm using a MODM7AE70 module and have one of the I/O pins set up to provide an interrupt whenever that pin is grounded. The interrupt works fine. I use EnableIrq() and DisableIrq() to disable the interrupt whenever I don't want it to occur. These also work fine but my problem is that the interrupt a...

That is exactly what I was looking for! Thanks Tom.

I've got Telnet working on my MODM7AE70 platform using the standard Netburner "Command" library functions. I'm interested in being able to know the IP address of the Telnet Client that logged into my board. I know that the basis for Telnet is a TCP connection (in this case on port 23). In ...